Install Thinking Five Whys Plus
Pick your agent. Every command is ready to paste.
npx skills add tjboudreaux/cc-thinking-skills --skill thinking-five-whys-plusThe open skills CLI detects your agents (Claude Code, Cursor, Codex and 70+ more) and installs to the right folder. Add -g to install globally.
01
Install it
Run the command above, or upload the folder in Claude.
02
Ask naturally
Describe the task. Your agent loads thinking-five-whys-plus when the request matches its description.
03
Name it if needed
If it does not trigger, say “use the thinking-five-whys-plus skill”. In Codex, type $thinking-five-whys-plus.
Five Whys Plus
Build an evidence-linked causal chain from a known proximate fault to an actionable systemic root, then prescribe a countermeasure that would have blocked it.
When to Use
- A fault is already localized to a component, path, or subsystem.
- The proximate cause is known, but recurrence or systemic root is not.
- Prior symptom-only fixes failed and the failure returned.
- You need prevention that addresses why the proximate cause was possible.
When NOT to Use
- Fault is not localized or multiple candidate causes remain — discriminate first.
- Root is evidenced and actionable — fix it.
- No evidence can answer the next "why" — gather evidence.
- One-off error without a process, tooling, or design enabler.
- Selective defect needing IS/IS-NOT analysis.
- Forward failure forecasting before commitment.
Procedure
- State the localized problem. Record the observable symptom, confirmed component/path, time window, scope, and impact. Stop if localization is missing.
- Chain why with evidence. Make the prior answer the new effect; propose a cause; cite logs, code, config, metrics, or witnesses; name and rule out alternatives. Stop on speculation.
- Branch before descending. Ask what else could produce the same effect; keep every evidenced independent pathway. Treat the retained branches as a causal set rather than forcing one root.
- Counterfactually test each pathway and the set. For each candidate ask, "Would removing this cause block this pathway?" Then ask, "Would removing the retained set block the observed failure?" Retain independently sufficient branches whose removal blocks their own pathway; do not reject them merely because another branch could still cause the failure.
- Enforce stop criteria per branch. Stop a branch only when its cause is evidenced, controllable, actionable, recurrence-preventing, non-blame (not merely "someone erred"), and counterfactual-positive for that pathway. If it hits human error, ask why the error was possible.
- Prescribe a countermeasure for every retained root. Name the systemic fix, owner-capable action, and how recurrence will be checked. Prefer removing enabling conditions over only patching the proximate symptom.
- Stop when verified or blocked. Halt when stop criteria pass and a countermeasure is specified, or when further steps lack evidence. Do not pad by habit.
Output
Problem: <localized symptom + component>
Chain:
Why1: <cause> | Evidence: <...> | Ruled out: <...>
WhyN: ...
Causal set check: would removing all retained roots block the failure? yes/no
Roots:
- <systemic cause> | Pathway counterfactual: <...>
Countermeasure: <action that removes the enabling condition>
Verification: <how to confirm this pathway is blocked>
Verification
- Falsify the chain if any step lacks evidence, if alternatives were never considered, if a retained root does not pass its pathway counterfactual, or if the full causal set does not explain the failure.
- Stop applying this skill once the root is fixed and verified, or when the problem is still pre-localization.
- Over-application guard: skip a full chain for a single known one-line defect; do not end at blame; do not invent depth without data.
Tips for Thinking Five Whys Plus
- • Start a fresh session after installing so your agent picks up the new skill.
- • It is part of a pack with 28 skills. Install only the ones you need with --skill to keep triggers precise.
- • If two skills overlap, mention the one you want by name.
Questions about Thinking Five Whys Plus
What does the Thinking Five Whys Plus skill do?
When a fault is localized and the proximate cause is known but the systemic root is not, chain evidence-linked whys with a counterfactual stop and a countermeasure.
How do I install Thinking Five Whys Plus?
Run "npx skills add tjboudreaux/cc-thinking-skills --skill thinking-five-whys-plus" in your project. The skills CLI installs it for Claude Code, Cursor, Codex and 70+ other agents. In Claude on the web, upload the skill folder as a ZIP under Customize > Skills.
Does Thinking Five Whys Plus work in Cursor and Codex?
Yes. Thinking Five Whys Plus uses the open SKILL.md format, so it works in Claude Code, Claude, Cursor, OpenAI Codex, Gemini CLI, GitHub Copilot and other agents that support agent skills.
Is Thinking Five Whys Plus free?
Thinking Five Whys Plus is open source on GitHub under the MIT license. It is free to install; check the license before commercial use.
Who made Thinking Five Whys Plus?
Thinking Five Whys Plus is published by tjboudreaux in the tjboudreaux/cc-thinking-skills repository, together with 27 other skills.




