Install MathModel Skill Standard
Pick your agent. Every command is ready to paste.
npx skills add yushui2022/MathModel-Skill --skill MathModel Skill StandardThe open skills CLI detects your agents (Claude Code, Cursor, Codex and 70+ more) and installs to the right folder. Add -g to install globally.
01
Install it
Run the command above, or upload the folder in Claude.
02
Ask naturally
Describe the task. Your agent loads MathModel Skill Standard when the request matches its description.
03
Name it if needed
If it does not trigger, say “use the MathModel Skill Standard skill”. In Codex, type $MathModel Skill Standard.
MathModel Skill Standard
这是 MathModel Skill 标准档(Standard 2.4 开发版)的商店条目。包内是十个协作技能加一个入口路由技能,按 S0-S8 阶段用文件和 SHA-256 交接:先真实计算,再正式成文,最后过 Word/PDF 渲染检查。
它不是一个"一键生成论文"的提示词。Agent 必须运行真实代码、保存结果证据,并通过证据门禁后才允许进入正式写作。
包内结构
SKILL.md 本条目说明(商店展示用)
install.py 安装器
requirements.txt 基础依赖
requirements-modeling.txt 优化求解可选依赖
VERSION
skills/
├── paper-workflow-orchestrator/ 入口:S0-S8 路由
├── problem-doc-model-selector/ S1 题意分析
├── modeling-paper-rubric-and-model-selector/ S2 模型路线与评分对齐
├── data-cleaning-and-visualization/ S3 数据清洗与图表
├── model-code-and-result-generator/ S4/S5 建模代码与真实运行
├── quality-assurance-auditor/ S6 证据门禁
├── paper-formal-writer/ S7/S8 正式写作与格式渲染检查
├── paper-micro-unit-generator/ 单章局部修复(非正式草稿)
├── context-memory-keeper/ 中断续跑记忆
└── authoritative-data-harvester/ 必要的公开外部数据
docs/ 安装、写作、契约、输出目录等说明
安装
方式一(推荐,支持托管升级):解压到独立目录,准备好另一个赛题项目目录,然后执行
python "<解压目录>/install.py" --project-root "<赛题目录>" --platform codex --check
python "<解压目录>/install.py" --project-root "<赛题目录>" --platform codex
--platform 取 codex(安装到 .agents/skills/)、claude(.claude/skills/)或 trae(.trae/skills/)。安装器只复制技能并记录哈希,不联网,不覆盖项目根配置、依赖文件、赛题或旧结果。
方式二(手动,不纳入托管升级):把 skills/ 下的十个目录整体复制到上面某一个位置,不能只复制 SKILL.md。
依赖在赛题项目的 Python 环境里单独安装:
python -m pip install -r "<解压目录>/requirements.txt"
python -m pip check
使用
- 在赛题项目根目录建立
problem_files/,放入赛题、官方附件与数据。 - 对 Agent 说:
请使用 paper-workflow-orchestrator 完成这个数学建模项目。
赛题和官方附件已放在 problem_files/。
先预检输入,再按 S0-S8 执行,必须真实运行代码并保留结果证据。
采用完整章节写作,允许分多轮完成,最后统一全文,不要只输出摘要或拼接微单元。
请核对当年赛题的篇幅和格式规则,不自行降低为短报告。
所有赛题产物写入 paper_output/;证据、写作与 Word/PDF 检查未通过,不要称为最终稿。
主要产物:paper_output/final_paper.docx、final_paper_source.md、qa/rendered/final_paper.pdf,以及 code/、results/、figures/、format_check_report.json。
边界(请先读)
- 需要 Python 3.11 或 3.12。最终 PDF 渲染检查需要 LibreOffice;缺少它可以先做前期工作,但不能称为最终稿。
- 检查通过代表证据、写作与格式门禁通过,不代表论文优秀或竞赛获奖。
- 一个赛题项目只安装一个 MathModel 版本,不要混装 Lite、Flash、Standard、Pro。
- 默认篇幅门槛(完整稿至少 14000 有效字符、渲染页至少 18 页)是防止极短稿的项目默认值,不是所有比赛的统一规定,页数上限仍需按当年赛题核对。
- 图表、数值结论和最优性表述都必须能追溯到本次运行的机器可读证据;手工改指标或结论会使证据门禁失败。
Tips for MathModel Skill Standard
- • Start a fresh session after installing so your agent picks up the new skill.
- • It is part of a pack with 11 skills. Install only the ones you need with --skill to keep triggers precise.
- • If two skills overlap, mention the one you want by name.
Questions about MathModel Skill Standard
What does the MathModel Skill Standard skill do?
数学建模全流程技能包:赛题与附件预检、题意与模型路线、数据与图表计划、真实运行建模代码、证据门禁、分章节正式写作与 Word/PDF 渲染检查,产出可复现的竞赛论文和全套证据。当用户要做完整篇数学建模竞赛论文时使用。
How do I install MathModel Skill Standard?
Run "npx skills add yushui2022/MathModel-Skill --skill MathModel Skill Standard" in your project. The skills CLI installs it for Claude Code, Cursor, Codex and 70+ other agents. In Claude on the web, upload the skill folder as a ZIP under Customize > Skills.
Does MathModel Skill Standard work in Cursor and Codex?
Yes. MathModel Skill Standard uses the open SKILL.md format, so it works in Claude Code, Claude, Cursor, OpenAI Codex, Gemini CLI, GitHub Copilot and other agents that support agent skills.
Is MathModel Skill Standard free?
MathModel Skill Standard is open source on GitHub under the MIT license. It is free to install; check the license before commercial use.
Who made MathModel Skill Standard?
MathModel Skill Standard is published by yushui2022 in the yushui2022/MathModel-Skill repository, together with 10 other skills.




