Blender Weather Fx skill

Weather FX

The execution model is in blender-core. Sky, sun/moon, fog and mood come from blender-time-of-day, so run scene_mood.py first, then add weather. Rendering settings are in blender-rendering.

One call each

scripts/precipitation.py -- --type rain --intensity heavy --ground Street Roofs --wind 2 0
scripts/surface_weather.py -- --objects Street Car Walls --wetness 0.7 --puddles 0.4 --ripples 1 --streaks 0.5
scripts/lightning.py -- --flashes 2 --strokes 3
scripts/precipitation.py -- --type snow --intensity moderate --ground Terrain
scripts/surface_weather.py -- --objects Terrain Roofs --snow 0.8 --snow-depth 0.06
scripts/surface_weather.py -- --objects Street Car Walls --remove     # exact restore

A rainy night: scene_mood.py --time night --fog-visibility 250 → rain → wetness + puddles → lightning. Rain and puddles at night are what sell a wet scene: wet surfaces reflect every practical light.

precipitation.py (rain, snow, dust, ash, embers)

• Builds a GN modifier on ENV_Weather_<Type>. Its box covers what the camera sees across the frame range: world-fixed, so moving cameras don't drag the rain. With no camera, it covers a 18 m box. The floor is the lowest top of --ground.
• Seamless loop with no simulation: each particle lives N whole times per loop (Lives), so the last frame + 1 equals the first frame exactly. It renders any frame on its own and works headless.
• Real speeds: rain 7 m/s (9 at heavy/storm), snow 1, ash 0.6, dust 0.15, embers rise at 1.5, combined with --wind X Y (m/s).
• Ground: a raycast against the --ground objects stops particles at the first hit (roofs, awnings, streets). Rain spawns splash crowns lasting 80 ms at each hit, aligned to the surface normal.
• Streaks, not motion blur: rain is a 3-sided streak of length = speed × ½ frame (a 180° shutter), aligned to the travel direction. Motion blur off is cheaper and looks the same.
• Particles closer than 1.5 m to the camera are hidden (Near Clear), because huge blobs ruin shots. The viewport shows 10% (Viewport Fraction), renders show 100%.
• Density per intensity (particles/m³): rain 5/15/40/80, snow 10/30/80/160. Override with --density. The count is capped by --max-count (400k), and the result warns when it caps.
• All values remain modifier inputs (Count, Speed, Wind, Lives, Particle Size, Streak Length, Sway, Ground, Splash...), so tweak them there instead of re-running.

surface_weather.py (wet, puddles, ripples, streaks, snow)

• Puts one ENV_Weather shader group in front of each Principled BSDF and records the originals on the material. --remove restores links and values exactly.
• Wet (Lagarde model): porous albedo darkens (up to 55% × --porosity), roughness drops, and a water film is added as Coat. Use porosity 0.6–0.9 for asphalt, concrete, wood and fabric, and 0.1–0.2 for metal, glass and plastic.
• Puddles: domain-warped world-space noise on up-facing faces. Coverage ≈ --puddles, feature size --scale (m, default 3). Inside a puddle: full coat, mirror coat roughness 0.02, and a flattened base normal, because water fills the cracks.
• Ripples: expanding rings, one per ~17 cm cell, driven by a frame driver (a simple expression, so it works without auto-run scripts). They only show inside puddles.
• Streaks: vertical noise on walls adds coat runs.
• Snow: up-facing coverage with a noisy edge, albedo 0.9, roughness 0.6 and a fine bump. --snow-depth adds real thickness with the ENV_SnowCover GN modifier: up-facing faces are subdivided and extruded upward by a noise height that is never zero, so there's no z-fighting. It uses the ENV_M_Snow material with subsurface.
• --vertex-mask writes the ENV_Weather color attribute (R puddles, G snow, B walls) for engine shaders.

lightning.py

• A strike is 3 return strokes ~50 ms apart (at least 2 frames apart, so the flicker reads at 24 fps), each a peak followed by a 2-frame decay. --strokes, --flashes or --frames set the timing. The flash is a cool ENV_Storm_Flash sun (12° soft) keyed against the scene's key light (×2.5).
• ENV_Storm_Bolt is a branching emissive curve (midpoint displacement plus 4 branches), keyed with the flash. By default it is 300 m away, in frame and off-center. The world background strength flashes too (--no-sky to skip).
• Keys use LINEAR interpolation (flashes must snap, not ease).

Rules

• Rain is visible only when backlit or side-lit against a darker background: put a practical or bright sky behind it. Front-lit rain disappears.
• Combine layers: fog (atmosphere) + rain streaks (mid) + splashes/ripples (ground) + wet reflections. Any one alone looks fake.
• Real scale is mandatory: speeds, densities and puddle sizes are in meters (blender-scene-setup).
• Check with a render at the final resolution. Rain density and streak visibility don't show in the viewport (10% count, no fog).
• Run blender-asset-qa on the snow geometry if the asset will be exported.

Games and real-time

Weather is an engine system (Unreal Niagara, Unity VFX Graph, Roblox ParticleEmitter). From Blender, export the masks: the vertex color attribute (--vertex-mask) or baked textures (blender-texture-baking self-bake of the wet material), plus snow cover meshes. Details are in references/realtime-engines.md. Physical values and the look library are in references/weather-values.md.

Gotchas

• GN particles are instances, so object.data stays empty. Read results through the evaluated depsgraph (depsgraph.object_instances).
• Background (-b) evaluation counts as the viewport for the Is Viewport node, so a headless test sees 10% of the count. Renders get 100%.
• Ground objects are linked into the ENV_Weather_<Type>_Ground collection (linked, not moved).
• surface_weather changes shared materials: every object using that material gets wet. Duplicate materials first to limit it.
• Coat appears in both engines. EEVEE needs raytracing on (eevee.use_raytracing) for good puddle reflections.